ABSTRACT: Cerebral palsy (CP) is a neurological disorder that affects approximately 2 out of every 1,000 live births. It is described as a group of developmental disorders of movement, balance, and posture, which cause activity limitation. Some studies have suggested that CP may increase the risk of dental trauma injuries (DTI). The objective of this study was to review the available scientific evidence on the prevalence and trends of DTI in people with CP, and to compare it with the prevalence of people without it. A systematic search was carried out in Pubmed, Scielo and Lilacs. Titles and abstracts were evaluated, excluding clinical case reports, systematic reviews, duplicate articles and/ or not relevant to the topic. Articles reporting the prevalence of DTI in people with CP were included. It was extracted information about the study type, methodology, prevalence of DTI, type of tooth, type of DTI in CP subjects and the prevalence of DTI from the control group, when available. A total of 32 articles were identified, of which 12 studies were selected and included for the systematic review and of these four were used in the meta-analysis. The prevalence of DTI in people with CP reported in these studies showed a range between 10.6-76.5 %. The upper incisors were the type of tooth most affected by DTI. Only four studies compared the DTI prevalence with a control group. The prevalence of DTI was higher in subjects with CP than in people without it (odds ratio 1.58 [95 % CI = 0.66 - 3.77]). However, this difference was not statistically significant and the included studies were highly heterogeneous.

RESUMEN: La parálisis cerebral (PC) es un trastorno neurológico que afecta aproximadamente 2 de cada 1000 nacidos vivos. Se describe como un grupo de trastornos del desarrollo del movimiento, equilibrio y postura, que causan limitación de actividad. Algunos estudios han planteado que la PC podría aumentar el riesgo de traumatismos dentoalveolares (TDA). El objetivo de este estudio fue revisar la evidencia científica disponible sobre prevalencia y tendencias de TDA en pacientes con PC, y compararla con la prevalencia de TDA en sujetos sin PC. Se realizó una búsqueda sistemática en Pubmed, Scielo y Lilacs. Se evaluaron títulos y resúmenes, excluyendo casos clínicos, revisiones sistemáticas, artículos duplicados y/o no atingentes al tema. Se incluyeron artículos que reportan prevalencia de TDA en personas con PC y se extrajo la información sobre el tipo estudio, metodología, prevalencia, tipo de diente, de TDA más frecuente en PC y datos de prevalencia de grupo control. Se identificó un total de 32 artículos, de los cuales se seleccionaron e incluyeron 12 estudios para la revisión sistemática y de ellos cuatro se utilizaron en el metaanálisis. La prevalencia de TDA en personas con PC reportada en estos estudios mostró un rango entre 10,6-76,5 %. Los incisivos superiores fueron el tipo de diente más afectado por TDA. Sólo cuatro estudios comparan con un grupo control. La prevalencia de TDA fue mayor en sujetos con PC que en sujetos sanos (odds ratio 1,58 [95 % IC= 0,66 - 3,77]). Sin embargo, esta diferencia no fue estadísticamente significativa y los estudios incluidos presentaron una alta heterogeneidad.

ABSTRACT: The aim of this study was to systematically review the literature of in vitro studies comparing the mechanical properties of teeth restored after selective caries excavation (SCE) and complete caries excavation (CCE). The PubMed/MEDLINE and EMBASE electronic databases were searched systematically. In vitro studies investigating the mechanical properties of teeth restored after SCE, were independently checked by two authors. Inclusion criteria were: (1) performing SCE (2) mentioning the teeth were later restored, and (3) evaluating mechanical properties of the restored teeth. Meta-analysis was performed with and without discriminating between shallow and deep lesions. From 1,859 potentially eligible studies, 14 were selected for full text analysis and 5 were included in the meta- analysis. Fracture resistance was significantly lower after SCE than after CCE in overall analysis (SMD[95%CI]=-1.62[-3.04,-0.20]) and for deep lesion (SMD[95%CI]=-1.62[-2.62,-0.61]), whereas cuspal deflection at 200 and 400N was significantly higher after SCE than after CCE for discriminated and non- discriminated analyses. Furthermore, for shallow lesions the risk of catastrophic fracture was significantly lower after SCE than CCE (RR[95%CI]=0.58[0.43,0.78]). The included studies presented low and medium risk of bias. The mechanical behavior of restored teeth seems to be affected by the excavation strategy. Although there is a tendency for lower fracture resistance and higher cuspal deflection after SCE, there is a lower risk of catastrophic failure when compared to CCE. However, this conclusion is based on very few in vitro studies.

RESUMEN: El objetivo de este estudio fue revisar sistemáticamente la literatura de estudios in vitro que comparan las propiedades mecánicas de los dientes restaurados después de la excavación selectiva de caries (ESC) y la excavación de caries completa (ECC). Se realizaron búsquedas sistemáticas en las bases de datos electrónicas PubMed / MEDLINE y EMBASE. Los estudios in vitro que investigan las propiedades mecánicas de los dientes restaurados después de la ESC fueron verificados de forma independiente por dos autores. Los criterios de inclusión fueron: (1) realizar ESC (2) mencionar que los dientes fueron posteriormente restaurados y (3) evaluar las propiedades mecánicas de los dientes restaurados. El metanálisis se realizó con y sin discriminación entre lesiones superficiales y profundas. De 1.859 estudios potencialmente elegibles, se seleccionaron 14 para el análisis de texto completo y 5 se incluyeron en el metanálisis. La resistencia a la fractura fue significativamente menor después de ESC que después de CCE en el análisis general (DME [IC del 95 %] = - 1,62 [-3,04, -0,20]) y para la lesión profunda (DME [IC del 95 %] = - 1,62 [-2,62, - 0,61]), mientras que la deflexión de las cúspides a 200 y 400 N fue significativamente mayor después de ESC que después de CCE para análisis discriminados y no discriminados. Además, para las lesiones superficiales, el riesgo de fractura catastrófica fue significativamente menor después de ESC que de CCE (RR [IC 95 %] = 0,58 [0,43,0,78]). Los estudios incluidos presentaron riesgo de sesgo bajo y medio. El comportamiento mecánico de los dientes restaurados parece verse afectado por la estrategia de excavación. Aunque existe una tendencia a una menor resistencia a la fractura y una mayor deflexión de la cúspide después de la ESC, existe un menor riesgo de falla catastrófica en comparación con la CCE. Sin embargo, esta conclusión se basa en muy pocos estudios in vitro.

ABSTRACT: Objective: Compare the radiopacity of different resin cements and verify their compliance with the requirements of ISO regulations. Material and method: Samples -10 mm in diameter and 1 mm thickness- of the resin cements RelyX U200 (3M ESPE), Calibra (Dentsply Sirona), Universal Calibra (Dentsply Sirona) and Bifix SE (VOCO) were prepared. Radiographies of the samples with a stepped aluminum wedge were obtained. For each sample, the grayscale and mm of Al values were calculated. The data were analyzed to compare the radiopacity of the materials and to contrast them with the requirements established by ISO standards. Results: The equivalent radiopacity in mm of Al in descending order was 2.84 ± 0.18 for Calibra, 2.37 ± 0.15 for Bifix SE, 2.26 ± 0.14 for Calibra Universal and 1.67 ± 0.07 for RelyX U200. These values exceed the value required by ISO 4049 standard. Statistically significant differences were established between the cements. Conclusion: There are differences in the radiopacity of the resin cements studied. However, all the cements complied with ISO 4049 radiopacity standards.

RESUMEN: Objetivo: comparar la radiopacidad de distintos cementos de resina y corroborar si cumplen con los requisitos de normativas ISO. Material y método: Se prepararon muestras de 1 mm de grosor de los cementos de resina: RelyX U200 (3M ESPE), Calibra (Dentsply Sirona), Calibra Universal (Dentsply Sirona) y Bifix SE (VOCO). Las muestras fueron radiografiadas junto a una cuña de aluminio escalonada. Las imágenes fueron analizadas para determinar el valor en escala de grises y su respectivo valor en mm de Al. Los datos fueron analizados para comparar la radiopacidad de los materiales entre sí y con los requisitos establecidos por normas ISO. Resultados: La radiopacidad equivalente en mm de Al en orden descendiente fue de 2,84 ± 0,18 para Calibra, 2,37 ± 0,15 para Bifix SE, 2,26 ± 0,14 para Calibra Universal y de 1,67 ± 0,07 para RelyX U200. Estos valores son todos mayores al mismo grosor de aluminio exigido por la norma ISO 4049. Se establecieron diferencias estadísticamente significativas entre los cementos. Conclusiones: Se determinó que existen diferencias en la radiopacidad entre los cementos de resina compuesta estudiados. Sin embargo, todos los cementos evaluados cumplen con la norma ISO-4049 de radiopacidad.

Abstract Objective To prepare nanocomposite cements based on the incorporation of bioactive glass nanoparticles (nBGs) into BiodentineTM (BD, Septodent, Saint-Maur-des-Fosses Cedex, France) and to assess their bioactive properties. Material and Methods nBGs were synthesised by the sol-gel method. BD nanocomposites (nBG/BD) were prepared with 1 and 2% nBGs by weight; unmodified BD and GC Fuji IX (GIC, GC Corporation, Tokyo, Japan) were used as references. The in vitro ability of the materials to induce apatite formation was assessed in SBF by X-ray diffraction (XRD), attenuated total reflectance with Fourier transform infrared spectroscopy (ATR-FTIR), and scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis. BD and nBG/BD were also applied to dentine discs for seven days; the morphology and elemental composition of the dentine-cement interface were analysed using SEM-EDX. Results One and two percent nBG/BD composites accelerated apatite formation on the disc surface after short-term immersion in SBF. Apatite was detected on the nBG/BD nanocomposites after three days, compared with seven days for unmodified BD. No apatite formation was detected on the GIC surface. nBG/BD formed a wider interfacial area with dentine than BD, showing blockage of dentine tubules and Si incorporation, suggesting intratubular precipitation. Conclusions The incorporation of nBGs into BD improves its in vitro bioactivity, accelerating the formation of a crystalline apatite layer on its surface after immersion in SBF. Compared with unmodified BD, nBG/BD showed a wider interfacial area with greater Si incorporation and intratubular precipitation of deposits when immersed in SBF.